AT2 Autosteering System
Keep the tractor on line and reduce skips, overlaps, and operator fatigue.
The FJD AT2 is an electric steering motor kit that adds RTK autosteering to any tractor, combine, sprayer or swather with power steering; the motor turns the wheel, so nothing is needed from the factory. With suitable RTK correction and proper calibration, it can reach up to ±2.5 cm accuracy and operate from 0.1–26 km/h. The system also supports terrain compensation, guidance-line planning, ISOBUS implement control, and automatic U-turns.
Best for: Farmers who want precise steering across planting, spraying, fertilizing, tillage, and harvest work.
For sale and in stock. Ships to the farm anywhere in the US, set up with you on the phone. Two-year warranty. Ask for a quote or call or text (580) 394-0089.
Talk To Farm Experts Call or Text (580) 394-0089
What the FJD AT2 does for you
RTK-Level Steering Accuracy
With suitable RTK correction and proper calibration, AT2 autosteering accuracy can reach up to ±2.5 cm. This helps reduce skips and overlaps in field operations.
Works Across Field Speeds
AT2 supports working speeds from 0.1–26 km/h. That covers slower work such as potato planting and faster work such as crop protection and fertilizing.
Terrain Compensation
The system compensates for vehicle tilt on sloping or uneven ground to help maintain consistent steering performance.
Automatic U-Turns
AT2 can plan and guide turns at the end of rows, including Ω-shaped and fishtail-shaped paths. Automatic U-turn is a paid function.
ISOBUS Implement Control
Use one terminal to manage compatible ISOBUS implements. Tasks can be scheduled and executed through the system.
Field Data Transfer
AT2 supports straight-line, curve, A+ line, and pivot guidance modes. Field boundaries, guidance lines, and other information can be transferred by USB in standard GIS format or connected through the FJD FieldFusion farm management system.
Which tractors does the FJD AT2 go on?
Pick your tractor brand for the model-by-model fit, or send us the make, model and year.
The AT2 up close
The AT2 is three main parts: a steering wheel with the motor built in, a 10.1-inch display and a roof receiver. Deep Sand Technology is an authorized FJDynamics dealer. We sell, set up and support the FJD AT2 for farms in all 50 states.









Tap any picture to see it full size.
What comes in the AT2 kit
Here is what we ship in an AT2 kit.

Steering motor and wheel
Replaces your steering wheel. The motor inside turns the column so the tractor steers itself. Works on 12 or 24 volt tractors; the wheel is 16.1 in or 15.0 in depending on kit.

10.1-inch display
The touchscreen you run steering, guidance lines and ISOBUS from. 1280 x 800 screen at 700 nits, so it reads in daylight.

Display mount
Bracket and mounting base that clamp the display to the armrest or a cab rail and let you angle it.

GNSS receiver
The globe on the cab roof. It reads satellite position and RTK corrections and has terrain compensation built in to help make up for tractor tilt on side hills.

Wheel angle sensor and leads
The sensor mounts on the front axle and tells the system how far the wheels are turned. It comes with its harness and an extension lead to reach the cab.

Harness set
Main wiring harness, spare main harness, GNSS receiver harness and power harness, one of each. Power comes straight off the tractor battery.

Roof mount set
Two antenna brackets with bolts, self-drilling screws and adhesive pads to fix the receiver on the cab roof.
Mounting hardware and paperwork
Screws, washers, nameplate, 20 cable ties, certificate, warranty card and user manual.
The spline adapter and motor bracket are matched to your tractor's steering column and come in our adapter kit. The angle sensor bracket is picked for your front axle, and a few machines run without the sensor.
Every kit we ship also comes with a SIM card with a one-year data plan, RTK activation before it ships, and setup help by phone. Options: ISOBUS cable, NMEA cable, Bluetooth remote (Easy Control), foot switch, wired or Wi-Fi camera, and the automatic U-turn activation.
We offer both radio and NTRIP RTK. Every system ships set up on NTRIP RTK.
Video: AT2 in 30 seconds
The FJD AT2 is an auto steer system for tractors with a 10-inch HD display. It steers the tractor and runs your implement through ISOBUS, with section and rate control.
What the video shows
- 1-inch accuracy
- Terrain compensation
- Auto turn available
- 10-inch HD display
- ISOBUS implement control
- Section and rate control
- Two-year warranty
- One-year buy-back guarantee
What is the difference between the AT2 and the AT2 Max?
Both steer to 1-inch accuracy and run implements through ISOBUS. The AT2 uses a 10-inch HD display. The AT2 Max uses a 12-inch display with 46% more visible area and 170% more computing power.
What warranty comes with the AT2?
A two-year warranty and a one-year buy-back guarantee.
AT2 specifications
Display
| Screen | 10.1 in touchscreen, 1280 x 800 |
|---|---|
| Brightness | 700 nits |
| Memory | 2 GB or 4 GB RAM by version, 8 GB storage |
Receiver and accuracy
| Satellites | GPS, GLONASS, BeiDou, Galileo, QZSS, multi-band |
|---|---|
| Corrections | RTK, PPP and SBAS |
| RTK setup | Ships set up on NTRIP RTK; radio RTK also offered |
| Accuracy | Rated to plus or minus 1 in (2.5 cm) with RTK and proper calibration |
| Working speed | 0.06 to 16 mph (0.1 to 26 km/h) |
| Terrain compensation | Yes, built into the receiver |
| Receiver size | 6.4 x 2.5 in (162 x 64.5 mm) |
Steering motor
| Voltage | 12 or 24 V |
|---|---|
| 410 mm wheel | 14.8 ft-lb (20 Nm) at 12 V, 22.1 ft-lb (30 Nm) at 24 V |
| 380 mm wheel | 11.1 ft-lb (15 Nm) at 12 V, 14.8 ft-lb (20 Nm) at 24 V |
| Seal rating | IP65 |
Sensors
| Roll and pitch | 0.2 deg (IMU in the receiver) |
|---|---|
| Gyro | 0.1 deg per second |
| Wheel angle sensor | Up to 200 Hz, under 0.1 deg resolution, IP67 |
Power
| Display and receiver | 9 to 36 V DC |
|---|---|
| Receiver draw | Under 300 mA |
Weather and temperature
| Working | -4 to 158 deg F (-20 to 70 C) |
|---|---|
| Storage | -40 to 185 deg F (-40 to 85 C) |
| Humidity | 0 to 95% at 104 deg F (40 C), non-condensing |
| Receiver seal | IP66 |
Connections
| Cell | 4G LTE, micro-SIM |
|---|---|
| Wi-Fi | 2.4 GHz |
| ISOBUS | Virtual terminal and task controller, with ISOBUS cable |
Software
| Guidance lines | Straight AB, A+, curve, pivot, tramlines, boundary lines |
|---|---|
| Automatic U-turn | Smart, omega and fishtail turns; optional activation |
| Field data | USB in standard GIS format, FieldFusion sync |
| Path Assist | Supported on compatible AT2 setups |
Not sure which numbers matter for your tractor? Ask us and we will go over them with you.
AT2 Lite, AT2, AT2 Max and AT2 Ultra side by side
Slide the chart sideways to see every column.
| AT2 Lite | AT2 | AT2 Max | AT2 Ultra | |
|---|---|---|---|---|
| Screen | 10 in tablet | 10.1 in | 12.1 in | 16 in |
| Resolution | 1280 x 800 | 1280 x 800 | 1280 x 800 | 1920 x 1200 |
| Memory (RAM) | 4 GB | 2 GB or 4 GB, by version | 4 GB | 4 GB |
| Split-screen windows | Ask us | Up to 3 | Up to 4 | Up to 5 |
| Wired camera inputs | Ask us | Newer versions | 1 | 2 |
| ISOBUS implement control | Not offered on this kit | Yes, with ISOBUS cable | Yes, with ISOBUS cable | Yes |
| TC-GEO, TC-SC, AUX-N | Not offered on this kit | Optional upgrade | Optional upgrade | Included |
| Automatic U-turn | Ask us | Optional upgrade | Optional upgrade | Included |
| Multi-machine sync | Ask us | Optional upgrade | Optional upgrade | Included |
| Steer-ready CAN and hydraulic | Ask us | Optional upgrade | Optional upgrade | Software unlocked; machine hardware separate |
Optional upgrade means a function we can add and activate for you. Ask us which ones fit your machine.
At a glance
| Display | 10.1 in touchscreen, 700 nits |
|---|---|
| Accuracy | Rated to plus or minus 1 in (2.5 cm) with RTK |
| Working speed | 0.06 to 16 mph (0.1 to 26 km/h) |
| Corrections | RTK, PPP and SBAS |
| Implement control | ISOBUS, with ISOBUS cable |
| Automatic U-turn | Available, optional activation |
| Field data | USB GIS files and FieldFusion |
Compatibility
The AT2 fits a wide range of farm machinery and runs ISOBUS-compatible implements. We check your tractor and implement before you order, and we help with the install by phone and remote support.
Not sure it fits your equipment? Send us the make, model and year and we will tell you straight.
Common questions
Is the AT2 a steering motor kit for a Kubota, Case IH or John Deere tractor?
Yes. The AT2 is an electric steering wheel motor kit. The motor bolts to the steering column with a bracket and spline matched to your tractor and turns the wheel; the receiver on the roof and the display do the rest. We put it on Kubota, Case IH, John Deere, New Holland, Ford, Massey Ferguson, Fendt, Versatile and anything else with power steering, steer-ready or not. Pick your brand on this page for the model-by-model fit, or text (580) 394-0089 with the make, model and year.
What accuracy can the FJD AT2 provide?
With suitable RTK correction and proper system calibration, autosteering accuracy can reach up to ±2.5 cm. Actual results depend on operating conditions and correction-signal setup.
Can I use the AT2 without an RTK internet connection?
The system supports PPP and SBAS correction signals, which give decimeter-level accuracy without internet constraints. Call DST to review the correction option that fits your farm.
Will the AT2 work with my tractor and implement?
Most likely. The AT2 fits a wide range of farm machinery and runs ISOBUS-compatible implements. Send us your make, model and year and we will check it before you order.
More in Autosteering & Guidance
AT2 Ultra Autosteering System
Keep your eyes on the job, with voice-assisted precision steering.
Learn moreAT2 Max Autosteering System
More screen and control for precision tractor guidance.
Learn moreAT2 Lite Autosteering System
RTK steering guidance for a simpler start in precision farming
Learn moreAS2 Steer Ready Autosteering
Plug-in autosteering for steer-ready tractors
Learn moreFarmers helping farmers
Over 30 years of experience. Trusted by thousands of farmers across the US. Two-year warranty. One-year buy-back guarantee. US-based support out of Oklahoma.
More on auto steer
Auto steer for tractors · How auto steer works · Is my tractor steer-ready? · Auto steer for older tractors · Hydraulic auto steer (AH2) · AS2 steer-ready · Compare FJD auto steer systems · Tractor GPS systems · RTK vs WAAS · FJD AT2 vs Wheelman · FJD AT2 vs Trimble EZ-Steer · All buyer guides · Autosteer solutions across the United States
