Auto Steer for Massey Ferguson and AGCO Tractors

Serving the United States

Created by Farmers for Farmers

Buy-Back Guarantee

Two-Year Warranty

Precision Products for New and Older Equipment

Massey, AGCO, Hesston, White, Gleaner
Massey, AGCO, Hesston, White, Gleaner

FJD Auto Steer Systems

We sell, ship and support auto steer in every state. This page is about Massey Ferguson and AGCO tractors. Fendt and Challenger have their own page. Different brand? The FJD auto steer systems page covers them all, or just call us.

Auto steer for Massey Ferguson and AGCO tractors, any model, any year

Deep Sand Tech puts affordable FJDynamics auto steer on AGCO iron of every age, from a Massey 1135 to a Hesston swather to a new 8S, steer ready or not. If it has a steering wheel and power steering, Deep Sand Tech has you covered! Every system comes with sub-inch RTK accuracy unlocked, a two-year warranty, fast phone and remote-login support from Oklahoma, and a 1-year buy back guarantee.

Get a quote for your Massey Call or Text (580) 394-0089
Any AGCO brandMassey Ferguson, AGCO DT and RT, Hesston, White, Gleaner. Fendt and Challenger have their own page
Plug-in CAN steerGuidance-ready Massey 6400 to 8700 are on FJD’s approved CAN list
Within 1 inchRTK pass-to-pass accuracy on the same lines year after year
1-year buy backRun it a season. If it is not for you, we buy it back

Three ways we steer a Massey

  1. AS2 on the factory CAN plug

    AGCO put CAN steering on more tractors, earlier, than anyone else. Guidance-ready Massey 6400, 7400, 6600, 6700, 7600, 7700, 8400, 8600 and 8700 series are on FJD’s approved list. AS2 plugs into the ISO port with no motor on the column. We confirm the serial before it ships.

  2. Electric steering motor kit on the column

    AT2 Lite, AT2, AT2 Max or AT2 Ultra. A motor and a model-specific bracket bolt to the steering column and turn the wheel. Fits any Massey, White or Hesston with a steering wheel. This is what goes on older Masseys, AGCO DTs, White tractors, Gleaners and the Hesston swathers. Most farmers install it themselves in an afternoon.

  3. AH2 hydraulic kit

    Some AGCO machines carry a hydraulic steering valve from a previous guidance system, and some owners want a valve instead of a motor. AH2 runs the valve that is there or one we add. Massey PVED valves are the CL type in our software. If CL does not take, we switch to CC. No harm done.


Massey Ferguson and AGCO model families and what fits

What each family came with from the factory, and what we usually put on it. A family being listed means the option existed, not that every tractor has it, so we confirm on your unit before anything ships.

Model familyFrom the factoryWhat we usually install
Massey Ferguson 100, 200, 1100 and 2700 series
1135, 1155, 2705, 2745, 265, 285
No steering valve. Power steering only.Electric motor kit. A 2705 tilt column has no good spot for a wheel angle sensor, so the motor kit is the one.
Massey 5400, 6400 and 7400
5425 to 5480, 6465 to 6499, 7465 to 7499
Base models have no valve. Guidance-ready 6400 and 7400 units steer over CAN and are on FJD’s list.AS2 on guidance-ready units, motor kit on base models and the 5400s.
Massey 6600, 6700, 7600, 7700 and S models
6612 to 6616, 6712 to 6718S, 7614 to 7626, 7714 to 7726S
Guidance-ready units steer over CAN. On FJD’s approved list.AS2 plugs into the ISO port. Motor kit on base models.
Massey 8400, 8600, 8700 and 8700S
8450 to 8480, 8650 to 8690, 8727 to 8740S
Guidance-ready units steer over CAN. On FJD’s approved list.AS2 plugs in. Motor kit on base models.
Massey 5S, 6S, 7S, 8S and 9S
5S.105 to 9S.425
CAN steering. 6S and 7S are on FJD’s list, the rest are the same family.AS2. We confirm the newer S models by serial.
AGCO DT and RT
DT180A to DT275B, RT100A to RT180A
Base models have no valve. Guidance-ready units steer over CAN.Motor kit on base models with the H bracket. AS2 on guidance-ready units.
Hesston and Massey swathers
WR series, 8550, 9000 series
A TopDock connector means it is steer ready. FJD is still working on CAN support for these swathers.Electric motor kit with the number 4 spline and the number 4 or 6 bracket.
White, Gleaner and other AGCO
White 8410, Gleaner R65, Terragator
No steering valve.Electric motor kit. The White 8410 takes the new number 4 bracket, the Terragator the heavy bracket, the Gleaner a tapered-shaft adapter.

Looking for one model number? The Massey Ferguson and AGCO steer-ready model list has every family that ever had a factory guidance option, line by line, with the kit we install on each.

Fendt Vario, Challenger MT, Rogator and Spra-Coupe are on the Fendt and Challenger page. Not on the list, or a different brand wearing the same model number? Call us. We have put kits on Massey 2705s.


See the AS2 steer-ready kit

What a plug-in install looks like on a steer-ready tractor. One minute and forty-three seconds.

Deep Sand Technology Now Offers The AS2 Steer Ready Autosteering System

What goes on the tractor

FJD AT2 electric steering motor mounted on a tractor steering column
The motor bolts to the steering column and turns the wheel. Nothing in the hydraulics is touched.
FJD GNSS receiver mounted on a tractor roof
The GNSS receiver goes on the roof and takes the RTK correction over cellular or radio.

Things we have learned on Massey installs

  • Massey steer-ready power cables come wired to the European standard. We swap the pins on the three-prong plug to the American standard before it ships.
  • The Massey steer-ready box has two CAN cables in it even though the parts list shows one. The bottom one is the production cable. The other is for swathers and combines and is not a production part.
  • On a Massey there are two ports under the console, EDT for diagnostics and ISO for steering. The cable goes in the ISO port. If you plug into EDT you get a transmission error that has nothing to do with the transmission.
  • Massey PVED valves are the CL type, not CC. CL and CC are valve types, not closed center. If CL does not work, switching to CC does no harm.
  • A number 4 spline is only three inches long. On a Hesston 8550 we cut no more than two inches off, and prefer to build a stronger clamp instead.
  • A 2020 Massey 2270 XD baler runs through ISOBUS plug and play once J1939 speed is turned on in our display.
What to send us for a quote
  • Model and year, and the serial number if you can read it.
  • A photo of the steering column from the seat, so we match the bracket and spline.
  • On a Massey, a photo of the ports under the right-hand console and whether the display has a steering screen.
  • Any implement you want rate or section control on, and which display is already in the cab.
Talk to farm experts

Common questions from Massey owners

My Massey is guidance-ready from the factory. Is it plug and play?

Yes. Guidance-ready Massey 6400 through 8700 series tractors steer over CAN and are on FJD’s approved list. The AS2 plugs into the ISO port under the console. We swap the power-cable pins to the American standard before it ships.

Can it steer my Hesston swather?

Yes, with the motor kit, number 4 spline and the number 4 or 6 bracket. A TopDock connector means the swather is steer ready, but FJD is still working on CAN support for Massey swathers, so the motor kit is what we ship today.

Will it run my Massey baler or planter?

Steering, yes. Rate and section control depends on the implement. A 2270 XD baler runs plug and play through ISOBUS. Send us the controller model and we tell you.

Do I need my own base station?

Usually not. Every kit ships with an RTK plan, and most customers run on the GEODNET network, which needs no base station of your own. Where coverage is thin we set you up with a base station or StarNav. We check coverage at your farm before we quote.

Who installs it and who do I call?

Most farmers install the motor kit themselves in an afternoon with our tech on the phone. Steer-ready installs take longer and we walk you through them. After that you call or text Deep Sand Tech in Oklahoma, and we can log into the display remotely to help.

Can I put auto steer on an AGCO Allis 9695, an MF 2745 or an MF 3080?

Yes. None of them had a factory guidance option, so the AT2 electric steering motor kit bolts to the column and turns the wheel; nothing is needed from the tractor. We have put kits on plenty of Masseys and AGCO Allis tractors from that era.

What fits an MF 5613 or 7620?

A 7620 ordered Auto-Guide-ready steers over CAN and is on FJD's tested list, so the AS2 plugs into the factory steering; a base 7620 takes the motor kit. A 5613 without Auto-Guide takes the motor kit. If the screen shows Auto-Guide, call us with the serial and we check the AS2 fit before anything ships.


Other tractor brands

Same approach, different color of paint. Pick a brand for its model-by-model fit.

More on auto steer

Auto steer for tractors · How auto steer works · Is my tractor steer-ready? · Auto steer for older tractors · Hydraulic auto steer (AH2) · AS2 steer-ready · Compare FJD auto steer systems · Tractor GPS systems · RTK vs WAAS · FJD AT2 vs Wheelman · FJD AT2 vs Trimble EZ-Steer · All buyer guides · Autosteer solutions across the United States

Deep Sand Technology

About Deep Sand Technology

Deep Sand Technology (Deep Sand Tech) is a farmer-owned, authorized FJDynamics dealer with over 30 years of experience. We sell, ship, install and support FJD autosteer kits and GEODNET network RTK for thousands of farmers across the US, in all 50 states. Everything on this page comes from our own installs and support calls, not from a brochure.

About us · Farmer reviews · Talk to a farmer · Call or text (580) 394-0089

It's easy to get started. Talk to a farmer today.

By submitting this form you agree to our Privacy Policy.